Rutland 504 Marine Mounting Kit
The 503 Marine Mounting Kit (also suited for the later Rutland 504) is a 2m (6.5ft) pole kit manufactured from stainless steel and supplied in 2 x 1 metre sections with a joiner section.
A pivoting deck fixing plate is supplied to support the base of the pole along with brackets to which guys or stays should be attached. Solid stays are recommended to provide a suitably rigid mount for the windcharger. Stays vary according to the individual requirements of your boat, but the Rutland Marine Stays Kit is often suitable.
If you want to construct your own mounting pole a continuous length of stainless steel or aluminium tube, a minimum 2 metre length is recommended. The mounting tube dimensions must be 31.7mm internal diameter and no more than 38mm outer diameter. Also available from Ecofreak are single 1 metre and 500mm tube sections, joiners and deck mounting plates for you to adapt to your own mounting design.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: