PV Logic Flexi 80W Solar Panel

PV Logic Flexi 80W Solar Panel
PV Logic Flexi 80W Solar Panel
Product Code: PVLFlexi60
Availability: In Stock
Price: £239.95
Ex-VAT: £199.96
Qty:     - OR -   Add to Wish List
Add to Compare

806mm x 665mm. The 80w PV Logic flexi solar panel can deliver up to 520wh per day and as such a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, powering electric gates and other low energy consumption DC appliance power is needed. Benefitting from a five year product warranty, the panel is supplied with a 4m cable, terminals, fuse and detailed installation instructions.

NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging.

Benefit from the semi-flexible panel's self-healing top surface

The ETFE top layer gives the PV Logic flexi extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are ‘healed’ within a few hours. The semi-flexible range can even be walked on with soft deck shoes! During production the ETFE is dimpled to further protect the panel and provide an anti-slip surface, particularly useful if the panel is fitted to a boat deck.

Completely waterproof

Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.

Superior design

There are no square edges on a PV Logic flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box.

Easy fix

The semi-flexible range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. The aluminium layer is also pre-drilled with 4.5mm holes should the panel need to be mechanically fixed as well as or instead of bonding.

Dimensions

Length 806mm x Width 665mm x Depth 4mm

Weight: 3.75kg

Technical Specifications

Pmax: 80W
Vmp: 17.6V
Imp: 4.55A
Voc: 21.9V 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Willgen, Church Farm, Wartnaby, Melton Mowbray, Leicestershire, LE14 3HU
VAT Number 350339081
Site By Intention web design
Powered by Green Web Hosting
Feeds: Product | Sitemap | RSS