PV Logic Flexi 10W Solar Panel Kit
380mm x 250mm. PV Logic Flexi solar panels are the ultimate choice for flat or slightly curved surfaces.
The 10w PV Logic flexi solar panel is great for small power consumption projects as diverse as powering electric fences to keeping the lights on in a trailer tent. The panel delivers a continuous trickle feed maintaining and extending the life of any 12-volt battery and delivers up to 65wh per day. Benefitting from a five year product warranty, it is fitted with a blocking diode to prevent reverse current drain, the 10w panel is supplied with a 4m cable, connectors, fuse and detailed installation instructions. NOTE – The 10w panel kit does not require a charge controller if the battery to be used is larger than 75Ah.
Included in the kit:
- 20W PV Logic Sem Flexible Solar Panel
- integral blocking diode
- 4m cable
- connectors and in-line fuse
- detailed installation instructions
Benefit from the semi-flexible panel's self-healing top surface
The ETFE top layer gives the PV Logic flexi extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are ‘healed’ within a few hours. The semi-flexible range can even be walked on with soft deck shoes! During production the ETFE is dimpled to further protect the panel and provide an anti-slip surface, particularly useful if the panel is fitted to a boat deck.
Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.
There are no square edges on a PV Logic flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box.
The semi-flexible range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. The aluminium layer is also pre-drilled with 4.5mm holes should the panel need to be mechanically fixed as well as or instead of bonding.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: